Canon iR C3200 Series Service Manual page 1111

RMT-LGIN
Settings
RE-PKEY
Settings
Note
HDD-TMP
Caution
Settings
HDD-TIM
Caution
Settings
T-18-110
ON/OFF setting of remote login operation to SSH server
0: Remote login operation to SSH server is disabled
[Factory default/After RAM clear]
1: Remote login operation to SSH server is enabled
T-18-111
ON/OFF setting of SSH server key reproduction
0: SSH server key is not reproduced.
[Factory default/After RAM clear]
1: SSH server key is reproduced.
This mode is enabled only when
COPIER>OPTION>BODY>SSH-SW is set to '1'.
T-18-112
Use it to set a level of temperature to serve as a reference for
detecting a low temperature error.
The new setting will not be valid until the power switch has
been turned off and then on again.
0 to 30 deg C at time of shipment/upon RAM initialization: 2
T-18-113
Use it to set the time interval allowed before a low temperature error is identified
The new setting will not be valid until the power switch has been turned off and
then on again.
0 to 200 min at time of shipment/upon RAM initialization: 10
Chapter 18
0006-8760
0006-8763
0007-6132
0007-6134
18-105