Test Print; Test Print Type; Selecting A Test Print Type - Canon iR C3200 Series Service Manual

Chapter 16

16.2 Test Print

16.2.1 Outline
The machine offers 6 types of test prints (TYPE), enabling identification of a fault in images with reference to test
prints.
If a fault appearing on a normal print does not show on a test print, the cause may be assumed to be on the PDL input
side or the reader unit side.

16.2.2 Test Print TYPE

TYPE NO.
0
1 to 3
4
5
6
7 to 9
10
11
12
13
14
15 to 100

16.2.3 Selecting a Test Print TYPE

1) Set the print count and paper size.
2) Make the following selections in service mode: COPIER>TEST>FG.
3) Make the following selections: COPIER>TEST>PG>TYPE.
4) Using the keypad, enter the desired TYPE No., and press the OK key.
5) Using 'COLOR-Y/M/C/K', select the desired color (output at '1').
6) Using 'DENS-Y/M/C/K', set the desired density. (valid only for TYPE=5)
7) Press the Start key.
16-4
T-16-1
Description
normal copy/print
- (for R&D)
16 gradations
full halftone
grid
- (for R&D)
MCYBk horizontal stripe (sub scanning direction)
- (for R&D)
64 gradations
- (for R&D)
full color 16 gradations
- (for R&D)
0006-5673
0006-5686
0006-5694