Option (Mechanical Specifications Setting Mode): Level 2 - Canon iR C3200 Series Service Manual

Hide thumbs Also See for iR C3200 Series:

Table of Contents

18.6.4 OPTION (mechanical specifications setting mode): Level 2

18.6.4.1 COPIER

18.6.4.1.1 BODY

Used to turn ON/OFF function that calculates scan area from selected paper size.

0: OFF (Scan area is determined by document detection.)

(Value at time of factory shipment/value after RAM clear)

1: ON (Scan area is determined by paper size.)

Sets whether to print out raw received data.

0: Normal operation (value at time of factory shipment/value after RAM clear)

1: Print out raw received data

Used to select language of remote UI used from Web.

Select language code with + and - keys.

Used to select whether number of output lines will be restricted when largevolume data is received by IFAX.

0: No restriction

1 to 999 (Value at time of factory shipment/value after RAM clear: 500)

Used to turn ON/OFF environmental compensation on ATR sensor output

Normally, the ATR sensor output value used is the value compensated for the environment.

0: Environmental compensation OFF

1: Environmental compensation ON (value at time of factory shipment/value after RAM clear)

If fogging occurs in a low-humidity environment, set this item to 0.

Used to change SMTP send port number.

0 to 65535 (increments of 1) (Value at time of factory shipment/value after RAM clear: 25)

Used to change SMTP receive port number.

0 to 65535 (increments of 1) (Value at time of factory shipment/value after RAM clear: 25)

Used to change POP receive port number.

0 to 65535 (increments of 1) (Value at time of factory shipment/value after RAM clear: 110)

Used to set special paper size not compatible with DF size recognition.

0: LEGAL (value at time of factory shipment/value after RAM clear)

Show Quick Links

Table of Contents

Ir c3220n prt