Canon iR C3200 Series Service Manual page 526

Chapter 10
10.10.40.7 Removing the Face-
Down Delivery Roller 1
1) Shift up the grounding leaf spring [1] using a flat-
blade screwdriver, and free the 2 claws.
F-10-390
2) Disconnect the connector [1], and detach the sensor
cable [2] from the face-down delivery sub frame;
then, remove the flag [3] of the face-down delivery
sensor 1, and detach the face-down delivery sub
frame [4].
F-10-391
Points to Note When Attaching the grounding Leaf
10-120
Spring
When attaching, shape the grounding leaf plate
removed in 3) into a half-loop, and work so that the
frame plate [1] and the grounding leaf spring [2] are in
0000-4826
contact.
3) Remove the E-ring [1] and the bushing [2], and
remove the gear [3] and the bushing [4] found to the
rear of the face-down delivery roller 1; then, detach
the face-down delivery roller 1 [5].
10.10.41 Face-Up Delivery Roller
10.10.41.1
Fixing/Feeder Unit
1) Remove the 2 stoppers [1], and detach the fixing/
F-10-392
F-10-393
Removing the
0006-2818