Canon iR C3200 Series Service Manual page 525

F-10-385
10.10.40.5
Removing
Delivery Sensor Mounting
Plate
1) Remove the screw [1], and detach the sensor
mounting plate [2].
F-10-386
Points to Note When Attaching the Delivery
Sensor Mounting Plate
When attaching the sensor mounting plate, secure it in
place with screws first and then route the wire to
facilitate the work.
10.10.40.6 Removing the Face-
Down Delivery Sensor Flag
1) Shift up the sensor flag [1] of the face-down
delivery sensor 1, and pull it upward to detach.
the
0006-0709
0006-3776
F-10-387
MEMO:
The edge of the sensor flag is cut to an I-shape,
permitting it to be removed upward.
F-10-388
Points to Note When Attaching the Sensor Flag
When attaching the sensor flag, be sure to match the
L-shaped area [A] of the spring against the groove [B]
of the face-down delivery sub frame.
F-10-389
Chapter 10
10-119