Chapter 9
F-9-197
9.8.13 Toner Container Drive Unit
9.8.13.1 Removing the Waste
Toner Container
1) Open the front cover, and turn the intermediate
transfer unit releasing lever [1] to detach the waste
toner container [2].
F-9-198
9-82
9.8.13.2 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
9.8.13.3 Removing the Lower
Rear Cover
0006-0801
1) Remove the lower rear cover.
9.8.13.4 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
9.8.13.5
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-9-199
Removing
the
0000-4582
0000-4583
0000-4584
0000-4585