Removing The Dc Controller Mounting - Canon iR C3200 Series Service Manual

12.5.13.7 Removing the DC
Controller Mounting
1) Disconnect all connectors from the PCB, and free
all harnesses from the cable clamps; then, remove
the 7 screws [1], and detach the DC controller PCB
[2] together with its base.
F-12-87
12.5.13.8 Removing the Relay
PCB 1
1) Disconnect the 9 connectors [1] and the 8 screws
[2] from the PCB; then, detach the relay PCB 1 [3].
F-12-88
12.5.14 Control Panel CPU PCB
12.5.14.1 Removing the Upper
Left Cover (small)
1) Remove the upper left cover (small).
12.5.14.2 Removing the Inside
Cover
0000-5309
1) Open the front cover and the drum unit cover.
2) Remove the 5 screws [1], and detach the inside
cover [2].
F-12-89
12.5.14.3
Control Panel
0000-5310
1) Remove the 4 screws [1], and detach the control
panel [2] toward the front.
2) Disconnect the connector [1], and detach the
control panel [2].
0000-5179
Chapter 12
Removing the
F-12-90
0000-5180
0000-5181
12-35