Chapter 12
F-12-223
2) Remove the 2 screws [1], and detach the main
controller base [2].
F-12-224
3) Remove the 7 screws [1], and detach the
developing drive assembly [2].
F-12-225
12-68
12.5.29.10
Removing
Lattice Connector Mounting
1) Remove the 2 screws [1], and disconnect all
connectors; then, detach the lattice connector
Mounting [2].
F-12-226
12.5.29.11
Removing
High-Voltage Unit
1) Disconnect all connectors of the high-voltage unit;
then, remove the 5 screws [1], and detach the high-
voltage unit [2].
F-12-227
2) Remove the 6 screws [1], and remove the base plate
[2]; then, detach the high-voltage unit [3].
the
0000-5335
the
0000-5336