E602-0202 Error Code: Recovered After Performing Hd-Check; E602-0202 Error Code: Because Of Faulty Sram Board Pcb - Canon iR C3200 Series Service Manual

Chapter 16

16.3.10.88 E602-0202 Error Code: Recovered after performing HD-CHECK

[ Case in the field ]
Description
E602-0202 is an error code occurring when a file system logical error occurs in the partition FSTDEV of the HDD.
Field Remedy
In the field, the following service mode recovered the host machine.
1. In service mode [COPIER> Function> SYSTEM> CHK-TYPE], enter "1" and then press OK. "1": Image storage
area
2. In service mode [COPIER> Function> SYSTEM> HD-CHECK], press OK.

16.3.10.89 E602-0202 Error Code: Because of faulty SRAM Board PCB

[ Inspected by Canon Inc. ]
Description
E602-0202 is an error code occurring when a file system logical error occurs in the partition FSTDEV of the HDD.
As a result of inspection, the SRAM Board PCB was found to be faulty in this case.
Field Remedy
Clear RAM of the SRAM in service mode [COPIER> Function> CLEAR> MN-CON].
If the symptom still recurs, replace the SRAM Board PCB with a new one.
Note: Clearing the RAM or replacement of the SRAM Board PCB will erase all the image data inside the HDD.
FG3-2856 SRAM Board PCB Ass'y
16.3.10.90 Progress bar on machine starting-up window is slower than usual, then
E602 Error Code is displayed
[ Case in the field ]
Field Remedy
In this case, executing clear of 'MN-CON' in service mode enabled the machine to start up; however, it took for
as long as 60 seconds (normally less than 40 seconds). Replacement of the HDD solved the problem.
HDD: WM2-5188
16.3.10.91 E602-0402 Error Code: not recovered after replacement of main
controller PCB
[ Case in the field ]
Field Remedy
E602-0402 can be displayed when a file system error occurs. There is a case in the field that replacement of the
SRAM board PCB which holds administrative data for the HDD.
SRAM Board PCB: FG3-2856
16-166
0002-3294
0002-3476
0004-4203
0004-5067