Canon iR C3200 Series Service Manual page 986

Chapter 17
Code
E032
E061
E110
E202
17-6
Detail Description
xxD0 The supply of toner for the toner
container to the developing
assembly has failed. The toner
cartridge motor fails to rotate.
The toner container is empty. The
toner supply mouth of the drum
unit is damaged. The ATR sensor
has an open circuit.
For the first 2 digits of detail code
xxEE,
xx=00: fault in access to drum
unit
xx=01: fault in access to toner
container
The counter of the NE controller fails to operate.
0000
Charging error
xxdd The charging DC bias exceeds
the upper limit.
The operation of the laser scanner motor is faulty.
0110 The rotation of the Y laser
scanner motor is faulty.
0210 The rotation of the M laser
scanner motor is faulty.
0310 The rotation of the C laser
scanner motor is faulty.
0410 The rotation of the K laser
scanner motor is faulty.
A fault has occurred in detecting the No. 1 mirror home position.
0000 The No. 1 mirror base moves in
reverse but does not move to its
home position.
Timing of detection
The fault occurs when an image is
being formed and, in addition, when
the T/D ratio drops while 20 prints
are being made continuously. It is
detected when toner supply
operation is started.
The counter function of the NE
controller fails to operate.
The motor lock signal remains in an
unlock state for 1 sec or more while
the laser scanner motor is in
operation.
The motor lock signal remains in an
unlock state for 1 sec or more while
the laser scanner motor is in
operation.
The motor lock signal remains in an
unlock state for 1 sec or more while
the laser scanner motor is in
operation.
The motor lock signal remains in an
unlock state for 1 sec or more while
the laser scanner motor is in
operation.
The home position sensor does not
go ON within a specific period of
time.