Canon iR C3200 Series Service Manual page 949

16.3.10.113 E732-9999 Error Code: Recorded in error log after performing service
mode COPIER> Function> CLEAR> MN-CON
[ Manual-related ]
Description
On a machine equipped with a reader unit, when you perform service mode [COPIER> Function> CLEAR>
MN-CON], the set value will be changed from "1" to "0" in service mode [COPIER> Option> BODY> W/
SCNR]. This indicates that the machine is set up as a printer model. At that time, a communication error occurs
between the reader unit, causing E732-9999 to be recorded in the error log. Then, a message like "Turn the
power OFF/ON" appears, and turning the power OFF/ON will automatically make the machine detect the reader
once again (the set value in [W/SCNR] will return from "0" to "1").
Consequently, there is no problem in the machine operation if E733-9999 appears in the error log.
Note: Take notice the following when you need to perform [MN-CON].
- Before performing [MN-CON], be sure to explain to your customer that all the images stored in the Inboxes
will be cleared.
- Before performing [MN-CON], be sure to output "P-PRINT" and "USER-PRINT". After performing,
compare the values on the both prints and enter the original values if they are changed.
16.3.10.114 E732-0001 Error code A message 'Starting up. Please wait' keeps
displaying for about 2 min. 40 sec. after the power is turned ON, and then the
error code results (DC power supply unit PCB J158 output failure)
Symptom
About 2 min. 40 sec. after the power is turned ON, a message 'Starting up. Please wait' is displayed and then
E732-001 (DC power supply unit PCB J158 output failure) is displayed. (Refer to SymptomExplanation.)
Description
When the power is turned ON, initialization of finisher and feeder should start if the main unit operates
normally.
Cause
DC power supply unit PCB (1) failure
Items to Check
1) Check whether DC line is supplied to the fuse PCB J58 from the DC power supply PCB J158. If there is no
input, check the DC power supply PCB.
2) Check whether AC line is supplied to the DC power supply PCB. If there is no problem with the AC line
input, the DC power supply PCB is likely faulty.
Field Remedy
Perform CheckItem and replace the DC power supply PCB, if faulty.
DC Power Supply PCB Ass'y Part No. FG6-8970-000 (100/120V), FG6-8971-000 (220/240V)
Chapter 16
0002-2011
0002-2012
16-175