Canon iR C3200 Series Service Manual page 540

Chapter 10
F-10-450
3) Disconnect the 2 connectors [1], and remove the 4
screws [2]; then, detach the delivery vertical path
unit [3].
F-10-451
Points to Note When Mounting the Delivery
Vertical Path Unit
When attaching, engage the left/right hook [1] found
on the side of the delivery vertical path unit on the
plate on the side of the machine, and secure it with
screws. (Be sure to tighten the left screw first.)
10-134
F-10-452
10.10.44.4
Removing
Delivery Vertical Path Unit
(New)
For the new delivery vertical path unit to function, the
version of the DC controller must be 3.06 or later. Be
sure to check its version in service mode:
COPIER>DISPLAY>VERSION>D-CON.
1) Slide out the fixing/feeding unit.
2) Open the delivery vertical path cover [1]; then,
remove the 2 screws [2], and detach the upper left
cover [3].
F-10-453
the
0006-8961