Removing The Copyboard Glass; Removing The Ccd Unit Cover; Removing The Original Size Detection Unit; Removing The Original Size Sensor - Canon iR C3200 Series Service Manual

F-6-85
6.4.11.2 Removing the CCD
Unit Cover
1) Remove the 8 screws [1], and detach the CCD unit
cover [2].
F-6-86
6.4.11.3 Removing the Original
Size Detection Unit
1) Disconnect the connector [1], and remove the 4
screws [2]; then, detach the original size detection
unit [3].
6.4.11.4 Removing the Original
0000-8282 Size Sensor
1) While freeing the claw at the edge, detach the
original size sensor [1].

6.4.12 Reader Heater (option)

0000-4427
6.4.12.1
Copyboard Glass
1) Open the ADF or the copyboard cover.
2)
Points to Note When Removing the Copyboard
Glass
When removing the copyboard glass, take care not to
touch the surface of the glass or the white plate behind
it.
(The presence of dirt will cause lines in the images.)
F-6-87
F-6-88
Removing the
Chapter 6
0000-4428
0000-8933
6-31