SALT-Dmax control
image position correctionSALT-Dhalf control
Drum/ITB
motor (M1)
Exposure (Y)
Charging (DC)
bias (Y)
Charging (AC)
bias (Y)
Development
motor (Y)
Developing (DC)
bias (Y)
Developing (AC)
bias (Y)
Upstream auxiliary (DC)
bias (Y)
Upstream auxiliary (AC)
bias (Y)
Downstream auxiliary (DC)
bias (Y)
Primary transfer
bias (Y)
Secondary
transfer bias
9.3.6 Printing Originals Containing a Color Page
When making copies/prints of originals containing a color page, the machine uses the following sequence to avoid
a drop in productivity:
color original:
monochrome original:
MEMO:
A switch-over from full-color mode to monochrome mode requires a sequence in which the high voltage of YMC
must be lowered. By reducing the use of such a sequence, the machine avoids an appreciable drop in productivity.
9.3.7 Driving and Controlling the Image Formation System and the
High-Voltage System
Drive Control
The image formation system is driven by the toner container motor, developing motor, and drum ITB motor
through gears. (For details, see the appropriate sections.)
New drum unit fitted,
and front cover closed
Approx. 30sec
Approx. 120sec
• Y Drum Unit Initialization Sequence
full-color mode sequence
for 3rd and subsequent copies/prints after color page, full-
color mode sequence for 4th and subsequent copies/prints
after color page, monochrome sequence
WMUPR
Scraping off toner
by auxiliary brush
Scraping off toner
by auxiliary brush
Cleaning by second-
ary transfer roller
F-9-10
T-9-16
Chapter 9
CNTR
PSTBY
Approx. 120sec
Image stabilization
control (for details, see
appropriate sections)
0000-4484
0000-4485
9-11