Removing The Drum Itb Motor - Canon iR C3200 Series Service Manual

F-9-64
2) Disconnect the 2 connectors [1], and remove the 3
screws [2]; then, detach the drum ITB motor base
[3].
F-9-65
9.8.1.16 Removing the Drum
ITB Motor
1) Remove the 4 screws [1], and detach the drum ITB
motor [2].
9.8.2 Drum Drive Unit
9.8.2.1 Slide Out the Drum Unit
1) Open the front cover, and slide out the drum unit to
the front.
9.8.2.2 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
9.8.2.3 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
9.8.2.4
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
0000-4629
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-9-66
Removing the
Chapter 9
0006-7762
0006-7769
0000-4632
0000-4633
9-53