Chapter 12
12.5.18.2 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
12.5.18.3 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
12.5.18.4
Removing
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-12-108
12.5.18.5 Removing the DC
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
12-40
0000-5228
0000-5231
the
0000-5229
0000-5230
F-12-109
When Attaching the DC Controller PCB Cover
When attaching the cover, take care so that the cut-off
will not come into contact with the latch of the flat
cable. Otherwise, the flat cable can come loose.
[1]
F-12-110
12.5.18.6 Opening the Main
Controller Box
1) Remove the 2 flat cables [1] used to connect the DC
controller PCB and the main controller PCB.
0000-5232