Mitsubishi GOT1000 GT15 User Manual page 94

No. Name
1) POWER LED
2) Display screen
3) Touch key
4) USB interface
5) RS-232 interface
6) Power terminal
7) Extension interface
8) CF card interface
9) CF card access LED
10) CF card access switch
Optional function board
11)
interface
12) Reset switch
13) Hole for unit installation fitting Hole for inserting the unit installation fitting
14) Battery holder
15) Protective ground terminal
Remark
4
4.5 Part Names and Settings of the GT155
- 12
Lit in green
Lit in red
Blinks in red
Not lit
Displays the Utility and the user creation screen
For operating touch switches in the Utility and the user creation screen
For connecting a personal computer
(Connector type: TYPE Mini-B)
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
Power input terminal, FG terminal
For installing an extension unit
For installing a CF card
Lit : CF card accessed
Not lit : CF card not accessed
Used for stopping the access to the CF card before removing the CF card from the
GOT
ON : CF card being accessed (CF card removal prohibited)
OFF : CF card not accessed (CF card removal possible)
For installing the optional function board
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit installed)
Houses the battery
For earthing
Connector used for the RS-232 interface
The specification of the connector used for the RS-232 interface of GT155
follows.
Manufacturer :DDK Ltd.
Mode name :17LE-23090-27 (D4CK) or equivalent product
Description
: Power is correctly supplied
: Screen saving
: Blown back light bulb
: Power is not supplied
is as