Mitsubishi GOT1000 GT15 User Manual page 234

2 The screen switches to the communication detail setting screen.
Set communication parameters from this screen.
Refer to the following for the setting change operation.
10
10.2 Communication Detail Settings
- 14
10.2.2 Communication detail settings display operation
9.3.3 Basic operation of settings change
Communication parameter setting by GT Designer3 or GT Designer2
Set the communication parameters for each communication driver at
[Communication Settings] in [Controller Setting] of GT Designer3 or in [System
Environment] of GT Designer2.
When change the communication parameters after downloading project data,
change the setting at communication detail setting of GOT.
•GOT1000 Series Connection Manual
for GT Works3 and a controller used
•GT Designer2 Version
(3.7 Communication Interface Setting (Communication setting))
Communication parameter
Screen Design Manual