Table of Contents
Advertisement
Error
code
Abnormal cyclic
851
transmission status
852 Abnormal host line status
853 Transient error
*1
When an error occurs, "FF
20
20.3 ERROR MESSAGE AND SYSTEM ALARM
- 34
20.3.2 List of Error Message/System Alarm
Error message
1. Check if terminating resistors are connected.
2. Check error codes for the PLC CPU.
3. Check the parameter for the PLC CPU on the master
4. Check the error status of the master station.
5. Refer to explanations of SB006E on the applicable
1. Check if the cable is unplugged or not.
2. Refer to explanations of SB0090 on the applicable
1. Check the transient error occurrence status for each
2. Refer to explanations of SB0094.
" is stored to the channel No.
H
Action
station.
network manual.
network manual.
station stored in SW0094 to SW0097.
Channel
No.
storage
Advertisement
Table of Contents
Troubleshooting
