14.11.3 Function setting
1
Function setting function
The functions for the operator information can be set.
The following items can be set.
Items
Automatic logout time
Auth method
Password expiration
date
Initial position input
Valid byte count input
14
14.11 Operator Information Management
- 54
14.11.3 Function setting
The time from when the last time the GOT is operated until when you
automatically log out of the GOT can be set.
(1 to 60 minutes, 0 is invalid.)
The authentication method can be switched.
([Operator name + password], [External auth (general)], [Fingerprint
authentication])
When [External auth (general)] or [Fingerprint authentication] is
selected, the check box for [Operator name + password] is displayed.
Set the item for regularly changing the password to be used for the
operator authentication.
(1 to 1000 days, 0 is invalid.)
When the password is out of date after setting the password, the GOT
requests the password change.
Set the initial position input (byte count) of external authentication ID
from among the data read from the external authentication device.
(0 to 1998 bytes)
Set the valid byte count for external authentication ID.
(2 to 16 bytes)
6
When the new password is correctly input,
the dialog box shown left is displayed and
the password is changed.
Description
Reference page
14-56
14-56
14-57
14-57
14-57