11.6 Adjusting the Touch Panel Position
(Touch panel calibration Setting)
11.6.1 Touch panel calibration setting function
Touch panel reading error can be corrected.
Normally the adjustment is not required, however, the difference between a touched position and the
object position may occur as the period of use elapses.
When any difference between a touched position and the object position occurs, correct the position
with this function.
11.6.2 Touch panel calibration setting display operation
Main menu
(
9.3 Utility Display)
11
11.6 Adjusting the Touch Panel Position (Touch panel calibration Setting)
- 23
11.6.1 Touch panel calibration setting function
Before adjustment
Run
Stop
The [Run] will operate though you
intended to touch the [Stop] button.
GOT setup
Touch
[GOT setup]
Touch panel calibration
After adjustment
Run
Stop
The [Stop] button can be touched
without fail.
Operation settings
Touch
[Operation]
Touch
[Touch panel calibration]
Perform touch panel
adjustment