Mitsubishi GOT1000 GT15 User Manual page 86

No. Name
1) POWER LED
2) Display screen
3) Touch key
4) Video/RGB interface
5) USB interface
6) RS-232 interface
7) Power terminal
8) Extension interface
9) CF card interface
10) CF card access LED
11) CF card access switch
Optional function board
12)
interface
Multi-color display board
13)
*2
interface
14) Reset switch
15) Hole for unit installation fitting
16) Battery holder
17) Human sensor
*1
*2
4
4.2 Part Names and Settings of the GT1585
- 4
Lit in green
Lit in orange
Blinks in orange/green : Blown back light bulb
Not lit
Displays the utility and the user creation screen.
For operating the touch switches in the utility and the user creation screen
For installing the video input unit, RGB input unit, video/RGB input unit, or RGB
*1
output unit
For connecting a personal computer
(Connector type: TYPE Mini-B)
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
Power input terminal, LG terminal, FG terminal
For installing an extension unit
For installing a CF card
Lit : CF card accessed
Not lit : CF card not accessed
Used for stopping the access to the CF card before removing the CF card from the
GOT
ON : CF card being accessed (CF card removal prohibited)
OFF : CF card not accessed (CF card removal possible)
For installing the optional function board
For installing the multi-color display board
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit installed)
Hole for inserting the unit installation fitting
Houses the battery.
Sensor that detects human movement
It is provided for the GT1585V-S only.
For the multi-color display board, refer to the following.
3.2.2 GT1585V-S, GT1585-S
Description
: Power is correctly supplied
: Screen saving
: Power is not supplied