I/O Check; I/O Check Function - Mitsubishi GOT1000 GT15 User Manual

14.7 I/O Check

14.7.1 I/O check function

The I/O check is a function which checks whether GOT and PLC can communicate with each other.
If I/O check ends normally, the communication interface and the connection cable hardwares are normal.
To execute I/O check, the communication driver has to be installed in GOT in advance from GT Designer3 or
GT Designer2.
Refer to the following for the details related to the installation of the communication driver.
• GT Designer3 Version1 Screen Design Manual (Fundamentals) (7 COMMUNICATION
WITH GOT)
• GT Designer2 Version
(8. TRANSFERRING DATA)
(1) Communication drivers inapplicable to I/O check
When the following communication drivers are used, the I/O check cannot be executed.
Connection type
MELSECNET/H
connection
MELSECNET/10
connection
CC-Link IE Controller
Connection
Network connection
to
MITSUBISHI
CC-Link IE Field
PLC
Network connection
CC-Link connection
(Intelligent device
station)
Ethernet connection
Connection to FUJI PLC
Connection to YASKAWA PLC
Connection to YOKOGAWA PLC
Connection to ALLEN-BRADLEY PLC
Connection to SIEMENS PLC
Microcomputer connection
Inverter connection
MODBUS /TCP connection
AZBIL control equipment connection
Connection to RKC temperature
controller
Basic Operation/Data Transfer Manual
MELSECNET/H
MELSECNET/H, MELSECNET/10
CC-Link IE Controller Network
CC-Link IE Field Network
CC-Linlk (ID), CC-Link Ver.2(ID)
Ethernet(MELSEC), Q17nNC, CRnD-700
FUJI PXR/PXG/PXH
YASKAWA GL/CP9200(SH/H)/CP9300MS, Ethernet (YASKAWA)
YOKOGAWA FA500/FA-M3/STARDOM, Ethernet (YOKOGAWA)
EtherNet/IP(AB)
SIEMENS S7-200, SIEMENS S7-300/400, Ethernet (SIEMENS S7)
Computer
FREQROL 500/700/800, Sensorless servo
MODBUS/TCP
Azbil SDC/DMC
RKC SR Mini HG (MODBUS)
Communication driver
14.7 I/O Check
14.7.1 I/O check function
9
10
11
12
13
14
15
16
14
- 17