Installing On Control Panel - Mitsubishi GOT1000 GT15 User Manual

8.7.3

Installing on control panel

The following shows how to install the CF card extension unit on the control panel.
1 Insert the control panel side installation unit into the installation hole of the control panel.
For the installation hole, refer to the following.
6. INSTALLATION
2 Fix the GOT side installation unit by tightening its fixing screws (2 places) with a tightening torque
of 0.36 to 0.48N.m.
3 Insert the connector with the ground cable into the GOT side installation unit, and insert the
connector without the ground cable into the control panel side installation unit.
(For GT155 , before connecting the connection cable to the GOT side installation unit, connect
the ground cable of the connection cable to the GOT's terminal block. Because the GOT's
terminal block overlaps with the connection cable, the ground cable cannot be connected to the
GOT's terminal block.)
After inserting the connectors, tighten the connection cable fixing screws.
GOT side installation unit
GOT
4 Connect the ground cable of the connection cable to the FG terminal of the GOT's power.
For connecting the ground cables, refer to the following.
7.6 Grounding Extension Units
8
8.7 CF Card Unit and CF Card Extension Unit
- 32
8.7.3 Installing on control panel
Control panel side
installation unit
A
A side
Ground
cable
B
B side