Table of Contents
Advertisement
*1
Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel due to its characteristics.
It is impossible to completely avoid this symptom, as the liquid crystal display comprises of a great number of
display elements. Please note that these dots appear due to its characteristic and are not caused by product
defect.
*2
With the hardware version indicated below, it will be 256 colors when the multi-color display board is not installed.
For how to confirm the function version, refer to the following.
Appendix Confirming of Versions and Conformed Standards
Item
GT1595
GT1595-XTBA
*3
The GOT screen saving/backlight off function prevents images from becoming permanently etched on the display
screen and increases the backlight life.
*4
ROM in which new data can be written without deleting the written data.
*5
Compliant with IP67 when the USB environmental protection cover is attached. Compliant with IP2X at the USB
interface only when a USB cable is connected. Note that this does not guarantee all users' operation
environment.
In addition, the GOT may not be available for use in the environment where oil or chemicals are splashed over for
a long period or where oil mist is filled.
*6
For using multiple extension units, a bar code reader, or a RFID controller, the total current for the extension
units, bar code reader, or RFID controller must be within the current that the GOT can supply.
For the current for the extension units, bar code reader or RFID controller, and the current that the GOT can
supply, refer to the following manual.
• GOT1000 Series Connection Manual for GT Works3 and a controller used
• GT Designer2 Version
*7
To use a stylus pen, the following specifications must be met.
Material: Polyacetal resin
Tip radius: 0.8mm or more
Model
Function version
A
Screen Design Manual (2.8 Multi-channel Function)
3.2 Performance Specifications
3
3.2.1 GT1595-X
1
2
3
4
5
6
7
8
- 5
Advertisement
Table of Contents
Troubleshooting
