Table of Contents
Advertisement
Remark
Locking the utility display by password
When you try to display the utility main menu while the password is set to the GOT
by GT Designer3 or GT Designer2, the display for password input will be appeared.
(The password setting of GT Designer3 is in the common menu.
The password setting of GT Designer2 is in the common menu.)
When the password is not matched, displays the error message.
When touching
(1) Input operation of password
1)Input the password after touching
2)Define the password by touching
3)To correct the input character, touch
and reinput/retype the new character.
(2) Password input cancel operation
When
Refer to the following for the details related to the password setting.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
• GT Designer2 Version
, the screen returns to the monitor screen.
OK
0
Enter
button is touched, it returns to the monitor screen.
Screen Design Manual
9.3.1 Display operation of main menu
to
,
to
key.
9
A
F
key, after password input.
key to delete the correcting character
Del
9.3 Utility Display
9
10
11
12
13
14
15
16
9
- 9
Advertisement
Table of Contents
Troubleshooting
