Table of Contents
Advertisement
8.17.2 Installing procedure
1
Power OFF the GOT.
2
Remove the extension unit cover (I/F-2 side) of GOT rear face.
3
Install the multi-color display board in the multi-color display board interface.
(When the extension unit is installed in GOT, remove the installed extension unit. And, do not touch the
board in the GOT when install the multi-color display board.)
4
After the installation, tighten a fixing screw within the specified torque range (0.25 to 0.35N·m).
8
8.17 Multi-Color Display Board
- 62
8.17.2 Installing procedure
Advertisement
Table of Contents
Troubleshooting
