Protective Cover For Oil; Applicable Protective Cover For Oil; Installation Procedure - Mitsubishi GOT1000 GT15 User Manual

Graphic operation terminal

Hide thumbs Also See for GOT1000 GT15:

Table of Contents

8.13 Protective cover for oil

Use of the protective cover for oil improves oil resistance, and chemical resistance of the GOT.

The following protective covers for oil are applicable to the GT15

Product name

Protective cover for oil

When the USB environmental protection cover is installed on the GOT, remove the cover.

After removing the cover, put the USB connector protective sticker on the USB connector.

8.13 Protective cover for oil

8.13.1 Applicable protective cover for oil

Before attaching protective cover for oil

For attaching the protective cover for oil to the GOT already mounted on the control

panel, follow the procedures as below.

• Remove the GOT from the control panel. Make sure to externally shut off all

phases of the power supply and remove all cables from the GOT in

• Clean dirt off surfaces of the GOT and control panel.

For 12.1" GOT

For 10.4" GOT

For 8.4" GOT

For 5.7" GOT

Got 1000 Gt15