5
Pull up the backlight drive board, and disconnect the cable connector of the backlight from the
connector of the backlight drive board.
6
Press the backlight fixing latch (black) with your finger, and pull out the backlight to the left.
When pulling the backlight, press the packing with your finger so that the backlight will not be hit with the
packing.
(When replacing GT15-80SLTT)
Latch
7
Mount a new backlight in the reverse procedure of removal.
Also assemble the case in the reverse procedure of disassembly.
(Tighten the GOT rear fixing screws within the following torque range:
Screw A: 0.186 to 0.245 N·m, Other screws: 0.36 to 0.48 N·m).
When mounting the case, take care of not biting the cables between the case and the GOT.
(When replacing GT15-70SLTT, GT15-70VLTT or GT15-
70VLTN)
Latch
Packing
19.6 Backlight Replacement
19.6.2 Replacement procedure of backlight
17
18
19
20
19
- 12