Table of Contents
Advertisement
Error
code
Insufficient Flash ROM
520
capacity
Insufficient user memory
521
(RAM) capacity
Unnecessary file deleted
522
to create new file.
Device writing error.
524
Correct device.
Unable to read/write
525
alarm log files under
different projects.
526 File conversion failed.
Improper monitor device.
530
Confirm monitor channel.
535 Cannot open image file.
Image file error or invalid
536
file format.
550 Invalid key code
Language switch failure.
560
Install optional functions.
Language switch failure.
561
Load expansion memory
board.
Install the font appropriate
562
for the specified system
language.
20
20.3 ERROR MESSAGE AND SYSTEM ALARM
- 30
20.3.2 List of Error Message/System Alarm
Error message
The capacity for the buffering area is insufficient in the build in
flash memory
1. Confirm whether there are no mistakes in specified
2. Install the option function board with add-on memory.
The capacity for the buffering area is insufficient in the user
memory (RAM)
1. Confirm whether there are no mistakes in specified
2. Install the option function board with add-on memory.
The old file of different contents has been deleted and a new
file has been created.
Note that the old file is deleted and the new file is created if
the file of the same name with different contents exists when
creating files.
When writing in the device, error occurred.
Correct the device.
Unable to read the alarm log file saved by the different
project.
Confirm the alarm log file and where to store the alarm log
file.
The file specified for the file conversion does not exist.
Check the settings for specifying a file to be converted.
The channel of the specified monitor target does not exist or
the channel is not the monitor target.
Confirm the monitor target channel of the screen data.
Confirm whether any file exists in the memory card.
1. Confirm whether the image file in the memory card is
2. Confirm whether any image file of invalid format is stored.
The key code input execution trigger was ON with the non-
target key code set in the key code storage device.
Confirm the key code supported by the object where error
occurs.
Switched language specifying KANJI other than Japanese
without the option OS installed.
Install the option OS.
Switched language specifying a KANJI region other than
Japanese without the option function board with add-on
memory installed.
Install the option function board with add-on memory.
No font appropriate for the system language specified at the
system language switching is installed.
Install the appropriate font.
Action
buffering area size.
buffering area size.
normal.
Channel
No.
storage
Advertisement
Table of Contents
Troubleshooting
