Mitsubishi GOT1000 GT15 User Manual page 323

6 Download operation/setup operation
(1) Download operation
Transfers the project data stored in the A drive (Standard CF Card) or B drive (Extended memory
card) to the C drive (Built in flash memory). (The GOT monitors using the data in the C drive.)
(This item explains using the A drive.)
Before download operation
(1) Setup cancel
When the project data in the A drive or B drive is set up, the project data cannot
be downloaded to the C drive.
Execute setup cancel (
data.
(2) Project data to be stored in a CF card
When storing the project data from GT Designer3 or GT Designer2 to CF card,
select [C: Built-in flash memory] for [Project Data] in the [Boot Drive].
(Continued to next page)
(2) Setup cancel) before downloading the project
1 Install a CF card in the GOT
Refer to the following for inserting/
removing method of CF card.
8.4 Video/RGB Unit
2 Touch [A: Standard CF Card] in Select
drive
13.3 Project Information
13.3.4 Operation of project information
9
10
11
12
13
14
15
16
13
- 23