6
Disconnect the cable connector of the backlight from the GOT side connector.
When the GOTs with the following hardware versions are used, remove the cable from an insulation
sheet for protecting cables.
• GT1562-VNBA (Hardware version S to AT)
• GT1562-VNBD (Hardware version K to AH)
7
Remove the cables from the 2 slits (black).
(Expanded figure of part B in (6))
8
Press the backlight fixing latch (black) with your finger, and pull out the backlight to the left.
A
(Expanded figure of part A in
• GT1562-VNBA (Hardware version AU or later)
• GT1562-VNBD (Hardware version AJ or later)
B
Insulation sheet
for protecting cables
Latch
19.6.2 Replacement procedure of backlight
B
)
Insulation sheet
for protecting cables
19.6 Backlight Replacement
17
18
19
20
19
- 18