Remark
Carries out write/read check of memory.
The following example explains about Memory Check using built-in flash memory (C drive).
For the Bulit-in CF card (A drive) memory check or Extended memory card (B drive) memory check, install
the CF card before carrying out the same key operations as built-in flash memory.
1
Select [Flash Memory] in the Memory check setting
screen.
If select
OK
displayed.
If select
Cancel
2
Touch to input password (
.
Enter
If touch
Enter
flash memory, which is completed in around 10 seconds.
14
14.3 Memory Check
- 6
14.3.2 Display operation of memory check
Mounting condition of optional devices (board)
The mounting status of option function board and multi-color display board is
displayed on the lower left of the memory check screen.
When mounted
When not mounted
When drive is not displayed
When the drive (memory) to check is not displayed, confirm the mounting procedure
or memory type with reference to the following.
• CF card inserting/removing method (
When no faults are found in mounting, etc, a memory failure may be arosen.
Replace the memory card or built-in flash memory (C drive).
For details of built-in flash memory, contact your local Mitsubishi (Electric System)
Service.
button, the numeric keyboard window is
button, returns to the initial menu.
5 9 2 0
,executes read/write check for the built-in
: The model numbers of the mounted option function board
and multi-color display board are displayed.
: "None" is displayed.Memory check operation
) and touch
8.8 CF Card)