Mitsubishi GOT1000 GT15 User Manual page 84

No. Name
1) POWER LED
2) Display screen
3) Touch key
4) USB interface
5) RS-232 interface
6) Power terminal
7) Extension interface
8) CF card interface
9) CF card access LED
10) CF card access switch
Optional function board
11)
interface
Multi-color display board
12)
*1
interface
13) Reset switch
14) Hole for unit installation fitting
15) Battery holder
16) Human sensor
17) Installation switch
*1
Remark
4
4.1 Part Names and Settings of the GT1595
- 2
Lit in green
Lit in orange
Blinks in orange/green : Blown back light bulb
Not lit
Displays the Utility and the user creation screen.
For operating the touch switches in the Utility and the user creation screen
For connecting a personal computer
(Connector type: TYPE Mini-B)
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
Power input terminal, LG terminal, FG terminal
For installing an extension unit
For installing a CF card
Lit : CF card accessed
Not lit : CF card not accessed
Used for stopping the access to the CF card before removing the CF card from the
GOT
ON : CF card being accessed (CF card removal prohibited)
OFF : CF card not accessed (CF card removal possible)
For installing the optional function board
For installing the multi-color display board
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit installed)
Hole for inserting the unit installation fitting
Houses the battery.
Sensor that detects human movement
Used for OS installations at the GOT startup
For the multi-color display board, refer to the following.
3.2.1 GT1595-X
Connector used for the RS-232 interface
The specification of the cconnector used for the RS-232 interface of GT1595 is as
follows.
Manufacturer :DDK Ltd.
Mode name
: Power is correctly supplied
: Screen saving
: Power is not supplied
:17LE-23090-27 (D4CK) or equivalent product
Description