9.3.3
Basic operation of settings change
1
Change of setting value
Setting item
1
Touch the select button (setting point) on the screen.
According to the setting item, the button requires selecting setting value, inputting value or displaying
other setting screen.
Key
ON
Key : It is a key for inputting the numerical value. It displays the keyboard on the bottom
Numerical
In the above mentioned screen example, there is no setting item which displays the keyboard. For the
operation of keyboard refer to the next page.
Touching
confirms the numerical input.
Enter
When the setting range exists it repeats the numerical without displaying keyboard.
Example:
Setting...
•
Key: It shifts to the setting screen of each setting item when touched.
(Displays the another setting screen.)
2
Setting contents are reflected if
Select button
: It is a key for selecting the setting value. Repeats with each touch
of the screen when touched.
4800bps 9600bps 19200bps
button is touched.
OK
Setting item
Select button
9.3 Utility Display
9.3.3 Basic operation of settings change
9
10
11
.
12
ON OFF
13
14
15
16
9
- 11