Utility Function List - Mitsubishi GOT1000 GT15 User Manual

9.2 Utility Function List

The items in the following list can be set/operated on the utility screens.
Item
Commun
ication Communication
setting setting
Ethernet setting
Display
Operation
GOT
setup
Q/L/QnA ladder
monitor
Transparent
mode settings
Video/RGB
Setting
Backup/
restoration
setting
Behavior of
duplicate IPs
Time setting & display
9
9.2 Utility Function List
- 2
Assigning channel numbers and communication drivers to
communication interfaces.
Setting communication parameters
Setting or deleting sequence program protection key words, canceling
sequence program protection status (When connecting to FX series
CPU)
Displaying the contents of Ethernet setting, changing the host
Setting the startup screen display time and screen saving time
Setting the backlight to ON or OFF during screen saving
Switching message languages
Setting the battery alarm display to ON or OFF
Setting the black and white inversion display to ON or OFF (For GT15,
applicable to only GT1550-Q)
Setting the human sensor (Applicable to only GT1595-X, GT1585V-S,
and GT1585-S)
Adjusting brightness and contrast
Setting the buzzer volume and window move buzzer
Setting the key sensitivity and key reaction speed
Setting the touch detection mode (Applicable to only GT1595-X)
Changing security levels
Setting the utility call keys
Adjusting the touch panel (Applicable to only GT1595-X)
SoftGOT-GOT link function setting
Setting the data storage location for the MELSEC-Q/L/QnA ladder
monitor function.(Inapplicable to GT1555-Q and GT1550-Q)
Setting the channel No. to be used for the communication for the FA
transparent function
Setting the video display and RGB display (Applicable to only GT1585V-
S and GT1575V-S)
Setting the storage locations for backup data and backup settings, and
setting the maximum number of backup data
Setting the trigger backup
Setting the GOT operation when a device with the same IP address as
that of the GOT is added to the network afterwards.
Selecting a base clock
Displaying and setting the clock current time
Displaying the battery status
Functions overview Reference
10
10.3
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
11.12
11.13
11.14
11.15
12
(Continued to next page)