Utility Function; Utility Execution - Mitsubishi GOT1000 GT15 User Manual

9.

UTILITY FUNCTION

Utility is a function, which carries out connection of GOT and controller, screen display and operation method
settings, program/data control and self-check etc.
Refer to the following for the utility function list.
9.3 Utility Display

9.1 Utility Execution

For utility execution, utility has to be displayed by installing BootOS and standard monitor OS in the C drive
(built in flash memory).
There are following three types for the installing BootOS and standard monitor OS methods.
GT Designer3
1) or
GT Designer2 GOT
GT Designer3
or
GT Designer2
GT Designer3
2)
or
GT Designer2 CF card
OS file
GT Designer3
or
GT Designer2
3) GOT CF card GOT
OS file
upload
GOT
Refer to the following for the installation which uses GT Designer3 or GT Designer2.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
• GT Designer2 Version
Refer to the following for the installation which uses GOT.
18. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
Via USB interface or
RS-232 interface
BootOS or standard OS installation
GOT
BootOS or standard
monitor OS installation
write
Install the
card in GOT
CF
card
BootOS, standard
monitor OS installation
Install the
CF card in GOT
card
Basic Operation/Data Transfer Manual
GOT • Installed directly from the GT Designer3
or GT Designer2
• When GOT is remote, installed easily
GOT
using the CF card
CF
• Install OS from GOT to GOT using
GOT
CF card
CF
9.1 Utility Execution
9
10
11
12
13
14
15
16
9
- 1