19.6 Backlight Replacement
This section explains the backlight replacing methods.
19.6.1 Applicable backlight
The following backlights are applicable for GT15
Model name
GT15-90XLTT
GT15-80SLTT
GT15-70SLTT
GT15-70VLTT
GT15-70VLTN
GT15-60VLTT
GT15-60VLTN
*1
For how to check the function version, refer to the following.
19.6.2 Replacement procedure of backlight
1
For GT15-90XLTT
1
Power off the GOT.
2
Disconnect the power supply cable and communication cable.
Remove the GOT from the control panel.
3
Remove the extension unit cover on the right side of the GOT.
When extension units, including bus connection units, are mounted on the GOT, remove the units.
4
Remove the GOT rear fixing screws (8 pcs.) with a screwdriver.
19
19.6 Backlight Replacement
- 7
19.6.1 Applicable backlight
For 15" high intensity, wide angle view TFT
(XGA)
For 12.1" high intensity, wide angle view
TFT (SVGA)
For 10.4" high intensity, wide angle view
TFT (SVGA)
For 10.4" high intensity, wide angle view
TFT (SVGA, VGA)
For 10.4" TFT (VGA)
For 8.4" high intensity, wide angle view TFT
(VGA)
For 8.4" TFT (VGA)
Appendix 2 Confirming of Versions and Conformed Standards
.
Description
A
Target GOT
GT1595-X
GT1585V-S, GT1585-S
GT1575-S (Function version B or
*1
earlier)
GT1575V-S (Function version C
*1
or later)
, GT1575-V
GT1575-VN, GT1572-VN
GT1565-V
GT1562-VN