Overview - Mitsubishi GOT1000 GT15 User Manual

1.

OVERVIEW

1 About GOT
GOT is installed on the panel surface of control panel or operating
panel and connects to the PLC in the control panel. GOT carries out
switch operation, lamp display, data display, and message display etc.
For display screen, two kinds of display screens, user-created screen
and utility screen are available.
(1) User-created Screen
User screen is a screen drawn by GT Designer3 or GT Designer2.
The objects of "Touch switch", "Lamp display", "Comment
display", and "Numeric display" can be laid out arbitrarily to be displayed.
Moreover, the multiple screens created by GT Designer3 or GT Designer2 can be overlapped and
switched to be displayed.
For details, refer to the following.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
• GT Designer3 Version1 Screen Design Manual (Functions)
• GT Designer2 Version
• GT Designer2 Version
(2) Utility Screen
Utility screen is a screen prepared beforehand for GOT.
Installing BootOS or standard OS in the GOT from GT Designer2 enables utility screen displaying.
The utility screen has menus as [Brightness/contrast adjustment screen] and [GOT memory check
screen] etc.
For details, refer to the following.
Chapter 9 to Chapter 17
Basic Operation/Data Transfer Manual
Screen Design Manual
PLC
Connector for
program
GOT
1
1
2
3
4
5
6
7
8
- 1