Table of Contents
Advertisement
2
Installing the CoreOS
1
Write the CoreOS from GT Designer3 or GT Designer2 to the CF card.
For details of GT Designer3 or GT Designer2 operation, refer to the following manual.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
(7 COMMUNICATION WITH GOT)
• GT Designer2 Version
(8. TRANSFERRING DATA)
2
After confirming that the GOT is powered off, install the CF card in the GOT.
After installing, switch the CF card access switch on.
3
Powering the GOT on displays the following screen.
To cancel the installation, power the GOT off and remove the CF card.
Basic Operation/Data Transfer Manual
18.5.1 Installing the CoreOS
18
18.5 CoreOS
- 12
17
18
19
20
Advertisement
Table of Contents
Troubleshooting
