16.1.3 Operating the maintenance timing setting
1
Touch a select button (item to be set) on the screen.
•
Key: If touched, displays the keyboard in the bottom part of the screen.
Numerical
Remark
2
If touch
button, the settings are reflected.
OK
3
If touch
button instead of touching
displayed, and the screen closes.
4
If touch
button, GOT restarts.
5
After restart, GOT operates with the changed settings.
(For keyboard operation, refer Section 9.3.3 Basic operation of settings change
page.)
Define the numerical input by
If touch
after inputting the value out of the setting range, the alarm message
Enter
is displayed.
Example:
OK
16.1.3 Operating the maintenance timing setting
.
Enter
button, the settings are canceled after the dialog below is
16.1 Maintenance Timing Setting
9
10
11
12
13
14
15
16
16
- 4