Mitsubishi GOT1000 GT15 User Manual page 325

(2) Setup operation
Sets the project data stored in the A drive (Standard CF Card) or B drive (Extended memory card)
to be used in the GOT.
The GOT monitors using the data in the A drive or B drive.
(This item explains using the A drive.)
Before setup operation
When storing project data from GT Designer3 or GT Designer2 to CF card, select
[A: Standard CF Card] for [Project Data] in [Boot Drive].
1 Install a CF card in the GOT.
For how to install a CF card, refer to the
following.
8.8 CF Card
2 Touch [A: Standard CF Card] in Select
drive.
3 If touch the
Download
mentioned left is displayed.
If touch button, the setup is
OK
executed.
4 When the setup is completed, the dialog
mentioned left is displayed.
Touching the
OK
GOT.
13.3 Project Information
13.3.4 Operation of project information
button, the dialog
button restarts the
13
- 25
9
10
11
12
13
14
15
16