Mitsubishi GOT1000 GT15 User Manual page 575

Appendix 5 How to Choose Drive
For using a CF card, select the A or B drive according to the following.
(1) A drive
The CF card interface built in the GOT is used as the A drive.
(2) B drive
The following two units can be used as the B drive.
• CF card unit
When an additional drive is used, use the CF card unit as the B drive of the GOT.
• CF card extension unit
When an additional drive is used, use the CF card extension unit as the B drive of the GOT.
Use the unit when a CF card interface is needed on the control panel.
1 Example of how to use CF card unit
Infrequently used data, including project data, are saved to a CF card, and frequently used data,
including alarm histories and operation logs, are saved to another CF card. The data can be saved in
each CF card.
2 Example of how to use CF card extension unit
The CF card extension unit can be used in the same way as the above "Example of how to use CF card
unit".
For using the CF card extension unit, there is no need to open the control panel's door when a CF card
is inserted or ejected.
Inside the
control panel
GOT
GOT CF card unit
Project data is saved to
the first CF card.
CF card extension unit
CF card
The first CF card: Project data
The second CF card: Alarm history, operation log
CF card extension unit
Alarm histories and operation logs are
saved to the second CF card.
Appendix 5 How to Choose Drive
Outside the
control panel
GOT
App
- 21
17
18
19
20