Mitsubishi GOT1000 GT15 User Manual page 553

Graphic operation terminal
Hide thumbs Also See for GOT1000 GT15:
Table of Contents

Advertisement

Error
Error message
code
613 Error in writing logfile
614 Error in reading logfile
Cannot connect to MES
615
Server. Check the Server.
Cannot connect to SNTP
616
Server. Check the Server.
An error occurred in a
640
FTP client process.
800 Abnormal module status
Abnormal baton passing
801
status
Abnormal cyclic
802
transmission status
803 Transient error
The cable on the IN side
804
is disconnected or is not
connected.
The cable on the OUT
805
side is disconnected or is
not connected.
CC-Link switch setting
850
error
Action
1. Insert a memory card.
2. Turn on the memory card access switch.
3. Check if the memory card is writable.
1. Insert a memory card.
2. Turn on the memory card access switch.
3. Check if the memory card is readable.
The server does not work normally or the connection path to
the server is made up incorrectly.
1. Check the operating conditions of the server.
2. Check the network to the server.
The settings for the SNTP server are wrong or the network to
the SNTP server is made up incorrectly.
1. Check the operating conditions of the STNP server.
2. Check the network to the SNTP server.
Reconfigure the GOT (FTP client) setting.
Check the operating status and network line of the FTP
server.
For the error details, check the GOT special register GS989
(FTP communication error notification).
GOT1000 Series Gateway Functions Manual for GT
Works3
Refer to explanations of SB0020 on the applicable network
manual.
Refer to explanations of SB0047 on the applicable network
manual.
Refer to explanations of SB0049 on the applicable network
manual.
Refer to explanations of SB00EE on the applicable network
manual.
Refer to explanations of SB0067 on the applicable network
manual.
Refer to explanations of SB0068 on the applicable network
manual.
1. Check if the switch settings have no error.
2. Check error codes stored in SW006A.
3. Refer to explanations of SB006A on the applicable
network manual.
20.3 ERROR MESSAGE AND SYSTEM ALARM
20.3.2 List of Error Message/System Alarm
17
Channel
No.
storage
18
19
20
20
- 33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Got 1000Gt15

Table of Contents