Grounding The Cable - Mitsubishi GOT1000 GT15 User Manual

Graphic operation terminal

Hide thumbs Also See for GOT1000 GT15:

Table of Contents

Grounding the cable

Ground the cable and grounding wire to the control panel where the GOT and base unit are installed.

5.4 Precautions for Wiring/Connecting the EMC Directive-Compliant Product

5.4.3 Grounding the cable

1) Ground the braided shield portion of the cable to the control panel

with the cable clamp (AD75CK).

Braided shield

Cable clamps

For the cable clamp attaching details,

refer to AD75CK-type Cable Clamping Instruction Manual <IB-68682>.

a) For GT15-C EXSS-1 and GT15-C BS

Ground the ground wire to the FG terminal of the GOT power supply section.

GOT FG terminal

Bus connection cable

b) For other bus connection cables

Ground the braided wire for grounding to the control panel

by tightening a screw.

2) Do not arrange the cable clamp adjacent to other cables which do not clamp.

Noise from the control panel may access the GOT from the cable clamp and

cause adverse effects.

Got 1000 Gt15