Table of Contents
Advertisement
(2) Terminal block socket installation (For GT15-RS4-TE only)
1
Insert the terminal block socket in the serial communication unit.
2
Fasten the terminal block by tightening the terminal block fixing screws (2 places) with the
tightening torque of 0.20 to 0.25 N·m.
When attaching or removing a communication cable
When attaching or removing a communication cable to/from the terminal block
socket, detach the terminal block socket from the connector.
(When extension units are installed in multiple layers, the units do not have to be
removed from the GOT main unit.)
A
(Extended figure of part A)
A terminal block
fixing screw
8.1 Communication Unit
8.1.2 Installing procedure
1
2
3
4
5
6
7
8
8
- 9
Advertisement
Table of Contents
Troubleshooting
