Table of Contents
Advertisement
6
Mount the GOT onto the control panel.
When the control panel is dirty, clean the control panel.
The panel cutting dimensions and mounting screw tightening torque with the protective cover for oil are
the same as those without the cover.
For how to mount the GOT onto the control panel, refer to the following.
7
6. INSTALLATION
8
8.13 Protective cover for oil
- 52
8.13.2 Installation procedure
Before mounting the GOT onto the control panel
Please confirm all surroundings. Whether the rubber packing part is surely covered
to prevent going into such as the requids in the board.
Make sure that corners of protective
cover for oil match those of GOT front.
Protectivecover
for oil
Panel cut
dimensions
Mounting metal fixture
Control panel
Advertisement
Table of Contents
Troubleshooting
