Precautions for protective cover for oil
• The protective cover for oil is a consumable product.
Check the cover for scratch, damage or dirt at regular intervals, and replace
with new one if necessary.
• Do not push the protective cover for oil with pointed tools, including
mechanical pencils and screwdrivers.
Doing so causes scratches and damages of the cover.
• Do not clean the protective cover for oil with bleaches, thinners, organic
solvents, corrosive chemicals, and others. Doing so causes changes in
shape and color of the cover.
• When the protective cover for oil is attached to the GOT, do not stretch and
bend the cover too much.
Doing so may cause a separation between the sheet and rubber.
• Do not place or use the protective cover for oil in direct sunshine.
• When the protective cover for oil gets dusts, wipe the dusts off with a damp
cloth.
• When the protective cover for oil is used, the USB connector on the GOT
front face cannot be used.
• When the protective cover for oil is used, the human sensor does not
correctly operate.
Disable the human sensor with the utility.
For the human sensor setting, refer to GT15 User's Manual.
11.1.3 Display setting operations
• Do not attach and remove the protective cover for oil frequently.
Doing so reduces oil resistance and chemical resistance.
• It is not the one to guarantee all customer's environments.
Moreover, it is not likely to be able to use it in the environment to which oil
splashes for a long time and the environment with which Oilmist is filled.
8.13 Protective cover for oil
8.13.2 Installation procedure
1
2
3
4
5
6
7
8
8
- 53