5.4 Precautions for Wiring/Connecting the EMC
Directive-Compliant Product
Wire and connect GOT1000 series equipments as instructed below. If the GOT1000 series equipments are
configured in a way different from the following instructions, the system may not comply with EMC directives.
5.4.1
Power and ground wires wiring method
(1) Power and ground wires wiring method
Connect the power wire and connection cable as shown in the illustration, and be sure to attach a
ferrite core within the range shown below. (Ferrite cores are not required for GT155
Select a ferrite core to be attached depending on the usage. (ZCAT3035-1330 manufactured by
TDK Corporation or RFC-H13 manufactured by KITAGAWA INDUSTRIES CO.,LTD.)
Attach the ferrite core as shown below.
Lead the power wire and ground wire as shown in Section 5.1.2 (2).
Be sure to ground the LG cable, FG cable, and protective ground cable.
(a) 100-240VAC GOT power section
• Video/RGB connection
5.4 Precautions for Wiring/Connecting the EMC Directive-Compliant Product
GOT power supply section
INPUT
100-240VAC
(LG)
(FG)
5.4.1 Power and ground wires wiring method
Ferrite core
(ZCAT3035-1330)
1
2
.)
3
4
5
6
7
8
5
- 15