Mitsubishi GOT1000 GT15 User Manual page 80

*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel due to its characteristics.
It is impossible to completely avoid this symptom, as the liquid crystal display comprises of a great number of
display elements. Flickers may be observed depending on the display color. Please note that these dots and
flickers appear due to its characteristic and are not caused by product defect.
There is a difference in the display brightness and the color tones between liquid crystal display panels. When
using multiple liquid crystal display panels, please note that there is an individual difference between them.
A crosstalk (shadow as an extension of the display) may appear on the liquid crystal display panel. Please note
that it appears due to its characteristic.
When the display section is seen from the outside of the display angle, the display color seems like it has
changed. Please note that it is due to its characteristic.
Please note that the response time, brightness and color of the liquid crystal display panel may vary depending
on the usage environmental temperature.
There is a difference in the display brightness and the color tones between liquid crystal display panels. When
using multiple liquid crystal display panels, please note that there is an individual difference between them.
A crosstalk (shadow as an extension of the display) may appear on the liquid crystal display panel. Please note
that it appears due to its characteristic.
When the display section is seen from the outside of the display angle, the display color seems like it has
changed. Please note that it is due to its characteristic.
Please note that the response time, brightness and color of the liquid crystal display panel may vary depending
on the usage environmental temperature.
*2 The GOT screen saving/backlight off function prevents images from becoming permanently etched on the display
screen and increases the backlight life.
*3 ROM in which new data can be written without deleting the written data.
*4 Compliant with IP67 when the USB environmental protection cover is attached. Compliant with IP2X at the USB
interface only when a USB cable is connected. Note that this does not guarantee all users' operation
environment.
In addition, the GOT may not be available for use in the environment where oil or chemicals are splashed over for
a long period or where oil mist is filled.
*5 For using multiple extension units, a bar code reader, or a RFID controller, the total current for the extension
units, bar code reader, or RFID controller must be within the current that the GOT can supply.
For the current for the extension units, bar code reader or RFID controller, and the current that the GOT can
supply, refer to the following manual.
*6 To use a stylus pen, the following specifications must be met.
*7 For hardware version AS or earlier, the display angle is as follows.
3
3.2 Performance Specifications
- 18
3.2.5 GT1555-V, GT1555-Q, GT1550-Q
• GOT1000 Series Connection Manual for GT Works3 and a controller used
• GT Designer2 Version
Material: Polyacetal resin
Tip radius: 0.8mm or more
Left/Right: 55 degrees
Top: 65 degrees
Bottom: 70 degrees
Screen Design Manual (2.8 Multi-channel Function)